Attachments and for Shimpo Force Gauges and Force Test Systems
FG-M10TEN7 Heavy-Duty Tensile Grip
- Manually tightened jaw faces can accept samples 1.25” (31.75 mm) wide and .25” (6.35 mm) thick. Contact faces are serrated hardened tool steel.
FG-M6WTER100 Wire Terminal Test Fixture
- Wire Terminal Test Fixture
- Capacity:100 lb / 50 Kg / 500 N
- Designed specifically to test the strength of wire/terminal connections. The upper grip consists of a self-aligning wheel with nine equally spaced slots of various terminal shank sizes; an eccentrically mounted, self-tightening bottom grip secures the wire on the other end.
FG-COMP Compression Plate
- 50 and 100MM steel compression plates for top load testing, large sample compression or crush testing, with polished finish. 50mm & 100mm plates available in M6 or M10 threading.
Price £ 74,00 - £ 141,00
FG-CLV Clevis Grip
- Odd shaped parts, punched samples or tension springs are easily secured and tested. Concave shape to pins assures centering under load. Throat clearance with pin is .5" (12.7 mm) and can easily accept samples up to .375" (9.65 mm) wide.
Price £ 92,00 - £ 101,00
FG-FLM Film Grip
- These heavy-duty, spring-loaded grips have serrated jaws for handling samples up to .39" (100 mm) thick and .79"(20 mm) or 1.97" (50 mm) wide.
FG-SP Spool Grip
- Ideal for hard-to-hold items like thread, filaments, etc. The sample is wrapped around the spool, anchored by friction.
FG-TAP Tape Grip
- Self tightening lever action makes this fixture perfect for testing rubber, tape and paper.
FG-TWN Cord and Twine Grip
- A unique figure 8 wrap of specimen assures a center break and non-locking pins permit quick installation and release. Throat and pin clearance is .375" (9.65 mm) wide with the throat width being .5" (1.7 mm)
Price £ 254,00 - £ 337,00
FG-WDG Wedge Grip
- Two capacities for lighter and heavier loads; spring-loaded jaws automatically close on the specimen and tighten as tension is applied. Ideal for testing wires, strip material and plastic tape or films.
Price £ 414,00 - £ 615,00
FG-FAB Fabric Grip
- Eccentrically mounted, serrated roller grip allow for self tightening of specimens up to 3" (76.20 mm) wide and .25" (6.4 mm) thick.
Price £ 357,00 - £ 378,00