If you reguarly have to test a limited selection different materials the TI-25S is the ideal product for you. It contains 8 velocities of the most common materials (see complete List of Materials below) and two velocities that the user can define by using a simple software program.
The TI-25S has an easy to read backlit display, even in dim light, and the unit operates for up to 200 hours on a single set of batteries.
The TI-25S comes complete, ready to use, and is protected by our 5 year limited warranty.
8 preset velocities and 2 custom velocities on the TI-25S allow the user to customize it for specific applications, or to tune the calibration to be optimized for a specific type of material. Each time the "MATL Key" is pressed the velocity will toggle from one to the next in a circular pattern.
The preset velocities are as follows:
Note: To define the Custom 1 & 2 options, the free PC software needs to be downloaded to the gauge using the optional data cable (p/n N-306-0010)
The TI-25S is supplied as a complete kit with:
DATA CABLE MUST BE ORDERED SEPARATELY TO PROGRAM USER #1 and #2 CUSTOM VELOCITIES
|Minimum Radius for Convex Surfaces||8.89 mm|
|Minimum Radius for Concave Surfaces||76.2 mm|
|Minimum Headroom||25.4 mm|
|Minimum Sample Diameter||3.8 mm|
|Minimum Substrate Thickness - F||NA|
|Minimum Substrate Thickness - NFe||NA|
|Measuring Range:||0.025 to 6.000 inches |
0.60 to 150.0 milimeters
depends on material and probe used
|Range in Steel:||0.60-150.0 mm (0.025-6.00")|
|Resolution:||0.01 millimeter |
|Velocity Range:||1250 to 10,000 meters/sec |
.0492 to .3937 in/µs
|Dimensions:||64 x 121 x 32 mm|
(2.5 W x 4.75 H x 1.25 D inches)
|Display:||4½ - Digit, 0.5" Backlit LCD|
|Probe:||1/4", 7.5 MHz, actual wearface is 10 mm|
Probe P/N: T-102-3300
|Cable:||1.2 m (4 ft.) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 15 m (50 ft.).|
|Temp. Limits:||Ambient: -30 to 50° C (-20 to 120° F)|
Material: -20 to 100° C (-0 to 200° F)
Special high temperature probes are optionally available.
|Battery Type:||Two 1.5V alkaline or 1.2V NiCad AA cells.|
|Battery Life:||Typically operates for 200 hours on alkaline and 130 hours on NiCad.|
|Accessories:||Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.|
|Warranty:||Gauge: 5 Years|
Probes: 90 Days