The TI-007X is especially designed for high-resolution measurements on thin metals and plastics.
Thin materials are measured with the single-element probe and delay tip. For the measurement of thicker materials, the ultrasound wall thickness gauge automatically switches from echo-echo mode (E-E) to the interface-echo mode (I-E). As to the the measurements of plastics, the plastic mode (PLAS) can be selected while using a graphite delay-tip.
In addition, the TI-007X offers the possibility of a difference mode (DIFF) with which a nominal value can be set. The device calculates then the ± difference between the nominal value and the measured wall thickness.
The TI-007X can also be used in combination with single element contact probes can also be used for an extention of the measurement range up to 923mm (depending on material and probe type). Single readings can be transferred to a PC or other device via the USB port. If you require the possibility of data storage, please refer to the TI-007DLX model.
The housing is made of extruded aluminum housing and is sealed to resist demanding industrial production conditions.
The TI-007X wall thickness gauge is delivered in a complete set in a foam-lined plastic carrying case including the following products:
|P/N||Description||Standard / Optional||Image|
|X-231-0000||1/4" x 3/8"
for all metalls
|X-241-0000||1/4" x 1/2"
for all metalls
|X-633-0000||1/4" x 3/8"
for thin plastics
The graphite tip is used in special plastic mode to measure plastics.
|Minimum Radius for Convex Surfaces||12.7 mm|
|Minimum Radius for Concave Surfaces||63.5 mm|
|Minimum Headroom||33.0 mm|
|Minimum Sample Diameter||12.7 mm|
|Maximum measuring range:||up to 924 mm |
(depending on material type and typeof probe)
|Measuring range with standard probe (T-402-5507):||0.15 - 25.4 mm with standard probe and delay-tip on steel|
|Resolution:||Switchable 0.001 mm or 0.01 mm|
|Gain:||Automatic time-dependent amplification (TDG) with manual override|
|Sound Velocity Range:||305 - 18542 m/sec|
|Probe (standard):||1/4 "diameter, 15 MHz probe with delay-tip and cable (item T402-5507)|
|Probe (optional):||Diverse single element probes with delay tip or contact probes (5 - 20 MHz)|
|Cable:||1.2m with Microdot / Lemo 00 connector|
|Display:||Multifunction LCD display with 7 segments and backlight|
|Backlight display:||Illumination selectable ON / OFF / AUTO and adjustable illumination intensity (Lo, Med, Hi)|
|Display update rate:||10 Hz (10 updates / second)|
|Data output:||Output of individual measured values via USB (no internal memory). Corresponding model with data memory is the TI-007DLX.|
|Operating temperature:||-30 - 75°C|
|Battery typ:||2x AA 1.5V alkaline, 1.2V NiCad or 1.5 lithium AA cells (rechargeable batteries can be used)|
|Battery duration:||Typically 35 hours with alkaline batteries and 18 hours with NiCad.|
|Dimensions:||64 x 131 x 32 mm|
|Housing:||Extruded aluminum body with nickel-plated aluminum end caps (sealed with gasket)|
|Class protection housing:||IP65|
|Certification:||NIST traceable and MIL-STD-45662A|
|Key board:||Sealed membrane keypad|
|Pulse Holwierde frequency:||200 Hz (200 pulses / second)|
|Guarantee:||Measuring device: 5 years |
Probe: 90 days