Standard Range: 0.040 to 6.00 in / 1.00 to 150.00 mm
Range in Cast Steel & AL: 0.040 to 1.50 in / 1.00 to 38.00 mm
The PR-82 isthe first affordableSonic Tester, utilizingstate-of-the-art digitaltechnology to producefast and accurate readings.It requires no special trainingto operate.
Unlike calipers, the PR-82 will measurewhere there is access to only oneside. This makes it valuable when measuringroll cage thickness, cylinder walls(before and after boring) and headsduring porting.
The PR-82 measures in two modes. Thefirst mode takes a measurement at thepoint you place the probe. The second isthe Scan mode, which is helpfulwhen measuring cylinder walls and rollcages. Place the probe at the bottom ofthe cylinder and drag it to the top, thegauge will display the thinnest readingmeasured.
The PR-82 is a lightweight, rugged toolthat is resistant to water and oil. Otherfeatures include a backlit LCD and abar graph to indicate signal stability.The 5 year warranty indicates how wefeel about the quality of the PR-82.The PR-82 can go where you go, to dothe work you do, saving you time andmoney, making fast, accuratemeasurements.
> 0.500"/5MHz with 2 inch radius
> this is the standard probe supplied with PR-82
++ In instances where the above probe does not work, or if the block is made from a very old Aluminum Cast Aluminum, an alternate probe should be specified p/n T-104-4120 (0.500"-10MHz), also supplied with a 2" radius.
For Heads (Ports)
Probe selection depends upon type of material; cast iron or cast aluminum. This probe has a 0.55" radius and is supplied with either a 1 inch wand or 9 inch wand, depending upon user preference.
> 0.250"/5MHz with 0.55" Radius
with 1 inch wand T-162-2110
with 9 inch wand T-132-2110
> 0.250/10MHz with 0.55" Radius
with 1 inch wand T-162-4110
with 9 inch wand T-132-4110
For Chassis Tubing
This would be used by chassis builders as well as sanctioning bodies (i.e. NHRA, ARCA, etc.). One probe is normally suitable for any application, assuming they do not want "thru-paint" capability.
> 3/16"-10MHz flat bottom (no radius)
For "thru-paint" capability, when measuring chassis tubing for use with the PR8V
>0.250/5MHz Hi-Damp for use in MMX Mode
The PR-82 is supplied as a complete kit:
|Range:||Standard Range: 0.040 to 6.00 in / 1.00 to 150.00 mm|
Range Cast Steel & AL: 0.040 to 1.50 in / 1.00 to 38.00 mm
|Resolution:||0.001 inches (0.01mm)|
|Velocity Range:||0.0492 to 0.3936 in./ms|
1250 to 9999 meters/sec
|Units:||English & Metric (inch or mm)|
|Transducer Types:||Dual Element (1 to 10 MHz)|
|Power Source:||Two 1.5V alkaline or 1.2V NiCad AA cells.|
|Battery Life:||Typically operates for 200 hours on alkaline and 130 hours on NiCad.|
|Auto Power off:||if idle 5 min|
|Display:||Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions|
|Keyboard:||Sealed membrane that is resistant to both water and petroleum products.|
|Case:||Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).|
|Operating Temperature:||-20 to 120F (-20 to 50C)|
|Weigth, net:||10 ounces (285 grams)|
|Dimensions:||2.5 W x 4.5 H x 1.24 D inches (6.35x11.43x3.15 cm)|
|Warranty:||5 year limited|
|Certification:||CE Approved, Factory calibration traceable to national standards|