We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email: info@checkline-europe.co.uk
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

TSFM500-DC Advanced High Capactiy Motorized Test Stand


Made in the USAThe TSFM500-DC Advanced Motorized Force Measurement Test Stand offers all the mechanical specifications of the TSFM motorized test stand, including 500 lb (2200 N) force capacity, generous clearance and throat depth, rugged design, and more, stepper motor design that prevents speed variation with load, and more.

The TSFM500-DC offers expanded capabilities, including PC control, programmable cycling, auto return, and other features.


Features
  • Loading table with 25 #10-32 UNF holes for fixture mounting
  • Available in vertical and horizontal orientations
  • Supplied with four hooks (small, medium, large, and extra large), 1/2-20F adapter plate, 2" and 3" compression plates, two couplers (#10-32 coupler and 5/16-18), and wrench set.

Related Products

Series-3 Digital Force Gauge


  • High-speed 2,000 Hz sampling rate
  • USB data output (single data point)

More details

Series-3 Digital Force Gauge

Series-4 Digital Force Gauge with Output


  • USB, RS-232, Mitutoyo, and analog outputs
  • 3,000 Hz peak sampling rate

More details

Series-4 Digital Force Gauge with Output

Series-5 Advanced Digital Force Gauge


  • High-speed 7,000 Hz peak sampling rate
  • USB, RS-232, Mitutoyo, and analog outputs

More details

Series-5 Advanced Digital Force Gauge

Accesories

Category Mark-10 Attachments


More details

Category  Mark-10 Attachments  991

Controller Features / Specifications
  • Computer Control
  • A bi-directional RS-232 port is provided to interface with a PC. For full control from a PC a command set is provided.
    The following additional items are required for PC control:
    - Series 5 force/torque gauge (more info)
    - 09-1056 serial cable
    - 09-1143 multi-function cable
  • Overload Protection
    Protects a force gauge against overload (requires a Series 5 force gauge and 09-1143 multi-function cable). The user programs the desired percentage of full scale of the gauge. Adjustable analog output voltage setting allows the test stand to interface with virtually any force gauge with analog output.
  • Auto-return
    The crosshead moves to a limit switch or force set point (requires a Series 5 force gauge), stops, and reverses direction at maximum speed to the other limit switch or set point.
  • Overload Protection
    Protects the torque sensor against overload (requires a Series 5 force gauge and 09-1143 multi-function cable). The desired percentage of full scale of the sensor can be user-programmed.
  • Cycling / Dwell Time
    The crosshead moves up and down between limit switches or force set points (requires a Series 5 force gauge). Configurable up to 99,999 cycles. Dwell time allows the operator to program the amount of time, up to 9,999.9 seconds, in 0.1 second intervals, for which the crosshead pauses at limits.
  • Programmable LEFT / RIGHT Button Functions
    LEFT and RIGHT button operation can be configured in three user-configurable modes: Maintained: a short push produces continuous motion until STOP is pressed, Momentary: crosshead moves only while the button is pressed, and Auto: short push produces maintained motion, while holding down the button will produce momentary motion.
  • Independent Left and Right Speeds
    Programmable independent speeds for left and right directions
  • Selectable speed units of measurement (in/min & mm/min)
  • Password protection
    Prevents unauthorized changes to test parameters.

 

* Contains no integrated travel measurement. Travel information available only through the external ESMH001 digital travel display, requiring an additional serial port on the PC. For an integrated solution with full PC control, including travel distance, see test stand model ESM301.

 


Specifications
Capacity 500lbs (2.2Kn)
Stroke 4.00" (102 mm)
Speed Range 0.01 - 6 in/min (0.2 - 150 mm/min]
Dimensions Refer to dimensions above
Weight 25 lbs (11.4 kg)
Warranty 3 years

Buy Now
Products

Product name
Price
Quantity
TSFM500-DC - Vertical Advanced Motorized Test Stand
£ 3.580,00 
SP-2589 - TSFM500 Upgrade to 1000 lbF
£ 862,00 
 
Accessories

Product name
Price
Quantity
TSF001 - Digital travel display for TSF-Series stands
£ 647,00 
TSFM002 - Limit switch kit for TSFM500(-DC)/TSFM500H(-DC)
£ 346,00 
TSF002 - Horizontal/wall mounting kit for TSF-Series and TST-Series stands
£ 174,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability : Available , preorder 1-2 weeks , special order, request

Request Information / Quotation




Your information/quotation request is send!


Close



Your message was successfully sent!