We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact Us
Email: info@checkline-europe.co.uk
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

For support please call
+44 (0)121 2855 222

ESM750S Motorized Test Stand

Made in the USAOur new ESM750S is the successor of the TSFM500-DC test stand. The ESM750S is one of our two latest additions to our motorized single column force test stand range. With its unique compact design and a maximum travel of 360 mm, this motorized test stand can be deployed for various compression and tension measurements at a maximum load capacity of 3,4 kN.

Furtmermore, due to its practical modular controller functions the ESM750S can be set up according to the most convenient testing environment; a key feature of our entire ESM product range.

The ESM750S is suitable for production as well as laboratory use with its extensive range of accessories such as grips and attachments. This new motorized single column test stand also offers the possibility to choose between a force gauge or an external load cell mount. 

A wide range of applications such as break detection, travel indication, cycling and much more can be realized with the ESM750S thanks to its adaptable clearance and depth dimensions and its generous travel. The table below gives a detailed overview of the available configurations.

The control panel of the ESM750S allows for an easy configuration of the test speed, force, distance limits, cycling and many other functions. Furthermore, to avoid unauthorized changes in the test settings, the user friendly menu can conveniently be password protected.

A free version of the MESUR™ gauge software is also available at no extra costs and enables an easy direct transfer of the ESM750S force and travel data to a computer. A graphic and analysis tool of the retrieved data is also offered by the Advanced version of MESUR™ gauge software.

The new ESM750S motorized single column force test stand can be monitored via a PC with a customer-written program in any language supporting ASCII communications.

  • Adjustable, removal controller with intuitive menu navigation
  • Suitable for crowded work benches due to compact footprint
  • Integration of most electronics in a removeable enclosure - easily removed and transported
  • Compatible with indicators and load cells, as well as force gauges
  • Stepper is motor-driven, producing smooth and quiet operation with no speed variation under load
  • Ergonomic design, with smart, clean cable management
  • USB data output: force vs. time or force vs. distance
  • Adjustable, removal controller with intuitive menu navigation
  • 3 years warranty
  • CE conformity mark


Control unitControl unit

The adjustable-angle control unit is comprised of a robust aluminum housing,  perfect for industrial production environments. It's easy to use with many optional additional functions such as the FollowMe function. Since the control unit is removable, it is also suitable for remote control or for table mounting with an optional mounting kit.



Travel limitersTravel limiters

The measuring path can be adjusted by upper and lower travel limiters and thus stops the test bench with a repeatability of 0.025 mm.




Adjustable mounting plate for attaching handles & accessoriesAdjustable mounting plate for attaching handles & accessories

The mounting plate can be repositioned for proper alignment on the X and Y axis. The mounting plate is provided with a matrix of threaded holes for mounting handles and accessories.




Modular construction

Modular construction

All the electronics are installed in a single panel, which is easy to remove for updates and maintenance.





FollowMe FollowMe

The FollowMe ™ feature allows you to control the strength level manually. By applying pressure to the force gauge shaft or load cell, the crosshead positions itself at different rates of speed according to the applied pressure. Its high adaptability makes it suitable for quick positioning as well as for fine tuning.



Force gaugeForce gauge

To take advantage of the full range of features of your dynamometer, you need a Series 5 or 7 force gauge that is capable of both,  force versus time and force versus displacement measurements combined with a data interface.




Handles and pull-out handle adapter Handles and pull-out handle adapter

A wide range of different holders, clamps and printing plates, etc. allowing the test bench to be adapted to almost any test situation.



Indicator / measuring cell adapte Indicator / measuring cell adapter

To mount a series 5i or 7i display and to mount a R01 or R03 force sensor.




MESUR MESURgauge is a measuring and analysis software MESUR MESURgauge is a measuring and analysis software

Captures the data available via the USB port of the ESM750S, enabling display of the data in graphical and tabular formats, as well as offering conversion into statistics and other reporting and output tools.

Controller Functions (optional)
Feature Part. No. Description Requirements
FollowMe SF008

Crosshead movement responds to manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning.

• Series 7 or 5 gauge or indicator
Travel indication SF009-1

Travel is indicated on the control unit display, with out via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-base designs. Backlash and nonlinearity are virtually eliminated.

• Series 7 or 5 gauge or indicator

• Can not be added in field

Computer control SF010

The ESM750S may be fully controlled by a PC through a custom-written program in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Checkline Europe)

• Series 7 or 5 gauge or indicator

• SF009 Travel indication

Programmable travel limits SF011

The stand stops at or cycles between programmable upper and lower travel distances

• SF009 Travel indication
Overload protection SF012 Protects a force sensor or force gauge against overload. Set the desired percentage of full scale of the gauge. Adjustable analoge output voltage setting allows the stand to interface with virtually any gauge with analog output. • Series 7 or 5 gauge or indicator
Auto return SF013

The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the other limit. Selectable reversing at force set point 

• Reversing at force set point: Series 7 or 5 gauge or indicator

• Reversing at travel limit: SF011 programmable travel limits option

• Reversing at break: SF019 break detection option

Cycling / dwell time SF014

Same function as auto return but with the ability to program up to 100.000 cycles. Programmable dwell time for upper and lower limits (set independently) can be set up for up to 10.000 seconds.

•  Same as auto return, at the same speed in each direction. Add SF016 for independet up and down speeds
Independent Up and Down speeds SF016 Individually configure speeds for the up and down directions -
Low speed extension SF017 Extends the standard speed range down to 0,02 mm/min. -
High speed extension SF018-1 Extends the max speed to 1,525 mm/min. -
Break detection SF019

Crosshead stops at a programmable drop in force

•  Series 7 or 5 gauge or indicator
Load holding SF020

Dynamically adjusts the crosshead position to maintain a specified load for an indefinite or specified period of time.

•  Series 7 or 5 gauge or indicator
• For a specified dwell time SF014 is required
Preload / sample touch SF021 Stops the corsshead and/or zeroes the travel display at an initial preload. Useful in tensile, compression, spring, elongation, and other applications. Preload is progammable as a percentage of force gauge/load cell full scale. Three modes: (1) stop, (2) stop and zero and (3) zero without stopping. •  Series 7 or 5 gauge or indicator
Profiles SF022

Save and recall sets of test parameters, such as speeds, travel limits, preload, etc. Maximum of 50 profiles may be stored.

Complete options package SFCOMP-1 Includes all functions listed above. Requires a Series 7 or 5 gauge or indicator

Related Products

Series-5 Advanced Digital Force Gauge

  • High-speed 7,000 Hz peak sampling rate
  • USB, RS-232, Mitutoyo, and analog outputs

More details

Series-5 Advanced Digital Force Gauge

Series-7 Professional Digital Force Gauge

  • High-speed sampling rate: 14,000 Hz
  • Continous data capture of up to 5,000 data points, at up to 14,000 Hz, downloadable to a PC
  • Automatic output / data storage / zeroing upon various event completions

More details

Series-7 Professional Digital Force Gauge

Series 5I Advanced Digital Force/Torque Indicator

  • Interchangeable force and torque sensors through Plug & Test technology
  • External trigger mode - for switch contact testing or remotely stopping display update

More details

Series 5I Advanced Digital Force/Torque Indicator

Series 7I Advanced Force/Torque Indicator

  • Continous data capture of up to 5,000 data points, at up to 14,000 Hz, downloadable to a PC
  • Interchangeable force and torque sensors through Plug & TestTM technology (sensors are sold separately)

More details

Series 7I Advanced Force/Torque Indicator

MESURgauge Mesurgauge Load & Travel Analysis Software

  • Sends data from a force or torque gauge and travel display to a PC for further analysis
  • Graph manipulation tools, including zooming, rescaling, panning, titles, and more

More details

MESURgauge Mesurgauge Load & Travel Analysis Software

Category Mark-10 Attachments

More details

Category  Mark-10 Attachments  Mark-10 Attachments

Load capacity: 3.4 kN < 900 mm/min
2.3 kN > 900 mm/min
Maximum travel distance: 360 mm
Speed range: Standard: 10-600 mm/min
Optional: 0.02 - 1,525 mm/min
Speed setting accuracy: ±0.2% of setting
Speed variation with load: ±0% [stepper motor driven]
Travel accuracy: ±0,05 mm per 250 mm
Travel resolution: 0,02 mm
Limit switch repeatability: 0,03 mm
Power: Universal input 80-240 VAC, 50/60 Hz
Weight: Test stand: 68kg
Shipping weight: 88kg
Conformance: CE mark
Warranty: 3 years

Buy Now

Product name
ESM-750SFG-E Test stand with force gauge mount, motorized, 3,4 kN
£ 4.522,00 
ESM-750SLC-E Test stand with load cell mount, motorized, 3.4 kN
£ 4.522,00 

Product name
SF-008 FollowMeTM force-based manual positioning
£ 385,00 
SF-009-1 Travel indication with USB output
£ 1.025,00 
SF-010 Computer control via USB
£ 812,00 
SF-011 Programmable travel set points
£ 641,00 
SF-012 Integrated overload protection
£ 556,00 
SF-013 Auto return
£ 385,00 
SF-014 Cycling / dwell time
£ 556,00 
SF-016 Independent up and down speeds
£ 343,00 
SF-017 Extended speed range, low
£ 385,00 
SF-018-1 Extended speed range, high
£ 385,00 
SF-019 Break detection
£ 385,00 
SF-020 Loadholding
£ 556,00 
SF-021 Preload / sample touch
£ 471,00 
SF-022 Profiles
£ 641,00 
SF-COMP-1 Complete options package for ESM1500S / ESM750S
£ 4.394,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability : Available , preorder 1-2 weeks , special order, request

Request Information / Quotation

Your information/quotation request is send!


Your message was successfully sent!