Contact
Phone:
+44 (0)121 2855 222
Email :
sales@checkline.eu
The G 080 is a compact, mechanically driven rotary
encoder. The mechanical rotary movements are converted
into pulses by a set of breaker points in the sensor
housing. An existing circuit to a pulse counting
mechanism is opened or closed. A large number of
transformation ratios are possible in the range from 1
rotation = 10 pulses to 32 rotations = 1 pulse.
| Contact | Normally open or normally closed |
| Contact loading | Max. 30 W / 100 VA Max. 220 V, max. 2 A |
| Spark suppression | Provided with inductive load |
| Max. speed | Max. 1500 rpm |
| Pulse speed | Max. 25 pulses/s |
| Mode of operation | Outputting pulses in both directions |
| Drive | Drive shaft 7 mm dia. of stainless steel, runs in porous-bronze slide bearings |
| Torque | Approx. 20 Nmm |
| Housing material | Polycarbonate, glass-fiber reinforced |
| Color | Light-gray |
| Weight | Approx. 250 g |
| El. connection | Cable gland PG 9 Connection cable 2 x 1 mm2, oil-resistant |
| Operating temperature | -10...+60 °C |
| Protection type | IP 52 as per DIN 40050 |
| Humidity | Max. relative humidity 95 %, non-condensing |
