Contact
Phone:
+44 (0)121 2855 222
Email :
sales@checkline.eu
The FH-Series models: FH-7200 and FH-7400 are portable thickness measuring devices that are capable to measure precisely materials with a thickness up to 24 mm. Their small size and portability makes them ideal to be used in production areas and quality laboratories. With the FH Series models accurate thickness measurements can be done on all types of non-ferrous products, regardless of their size, shape, and material.
The FH-7200 and FH-7400 are ideal for applications where accurate measurement of sharp corners, small radiuses and/or complex shapes are required.
The FH-Series models: FH-7200 and FH-7400 are used for non-destructive wall thickness measurement of:
The two models available in this series
FH-7200 offers measurement capabilities including real-time thickness measurement, display of minimum & maximum readings, an offset mode, and automatic storage of up to 100,000 values.
FH-7400 this model has the same capabilities as the MiniTest 7200 FH but with extra features: statistical graphing, real time trend, data base with up to 200 batches and increased automatic storage of up to 240.000 values. e.g. 1200 per batch.
There are five probes available
FH4 Standard Probe (Measuring range 0 - 6mm / calibration curves for ball sizes 1.5mm, 2.5mm, 4mm)
FH4-1MM Probe (Measuring range 0 - 6mm / same as standard FH4 probe with additional 1mm ball calibration curve for very small concave surfaces)
FH4-M Probe (Measuring range 0 - 9mm / same as standard FH4 but also suitable for magnetic balls to extend measuring range to 9mm)
FH10 Standard Probe (Measuring range 0 - 13mm / calibration curves for balls sizes 2.5mm, 4mm, 6mm, 9mm)
FH10-M Standard Probe (Measuring range 0 - 24mm / same as standard FH10 but also suitable for magnetic balls to extend measuring range to 24mm)
The basic units MiniTest FH7200 and MiniTest FH7400 are supplied in foam fitted case and it contains the following items:
- MiniTest FH7200 or MiniTest FH7400 Device
- Rubber protection case
- Operating instructions (English/German/French/Spanish/Portuguese/Italian)
- 4x AA Batteries, type LR06 - MSoft 7 Professional Edition
- Magnetic Screwdriver
- MSoft Pro 7 Software
-Manufacturer certificate according to DIN 55350 M
Depending on the selection of your probe the following scope of the delivery applies:
FH4 Probe
- Magnetic Probe Protection sleeve and end cap
- Spring loaded probe holder / Table stand
- ±100 pcs Ø 1.5mm balls / ±100 pcs Ø 2.5mm / ±50 pcs Ø 4.0mm
- Zero calibration tip for Ø 1.5mm / Ø 2.5mm / Ø 4.0mm balls
- Calibrations Standards: 0.25mm / 1mm / 3mm
FH4-1MM Probe
- Magnetic Probe Protection sleeve and end cap
- Spring loaded probe holder / Table stand
- ±100 pcs Ø 1.0mm balls / ±100 pcs Ø 1.5mm balls / ±100 pcs Ø 2.5mm / ±50 pcs Ø 4.0mm
- Zero calibration tip for Ø 1.0mm / Ø 1.5mm / Ø 2.5mm / Ø 4.0mm balls
- Calibrations Standards: 0.15mm / 0.25mm / 1mm / 3mm
FH4-M Probe
- Magnetic Probe Protection sleeve and end cap
- Spring loaded probe holder / Table stand
- ±100 pcs Ø 1.5mm balls / ±100 pcs Ø 2.5mm / ±50 pcs Ø 4.0mm / ±25 pcs Ø 1.5mm magnetic balls / ±20 pcs Ø 3.0mm magnetic balls
- Zero calibration tip for Ø 1.5mm / Ø 2.5mm / Ø 3.0mm / Ø 4.0mm balls
- Calibrations Standards: 0.25mm / 1mm / 3mm / 8mm
FH10 Probe
- Magnetic Probe Protection sleeve and end cap
- Spring loaded probe holder / Table stand
- ±100 pcs Ø 2.5mm balls / ±50 pcs Ø 4.0mm / ±25 pcs Ø 6.0mm / ±10 pcs Ø 9.0mm
- Zero calibration tip for Ø 2.5mm / Ø 4mm / Ø 6mm / Ø 9mm balls
- Calibrations Standards: 1mm / 3mm / 8mm
FH10-M Probe
- Magnetic Probe Protection sleeve and end cap
- Spring loaded probe holder / Table stand
- ±100 pcs Ø 2.5mm balls / ±50 pcs Ø 4.0mm balls / ±25 pcs Ø 6.0mm balls /
±20 pcs Ø 4.0mm magnetic balls / ±20 pcs Ø 6.0mm magnetic balls / ±10 pcs Ø 9.0mm magnetic balls
- Zero calibration tip for Ø 2.5mm / Ø 4mm / Ø 6mm / Ø 9mm balls
- Calibrations Standards: 1mm / 3mm / 8mm / 18mm
| Measuring Range all FH4 probes | 0-1.3mm with 1.0mm ball (FH4-1MM Only!) 0-2.0mm with 1.5mm ball 0-3.5mm with 2.5mm ball 0-6.0mm with 4.0mm ball 0-5.0mm with 1.5mm magnetic ball (FH4-M Only!) 0-9.0mm with 3.0mm magnetic ball (FH4-M Only!) |
| Measuring Range with FH10 Probes | 0-4.0mm with 2.5mm ball 0-7.0mm with 4.0mm ball 0-10.0mm with 6.0mm ball 0-13.0mm with 9.0mm ball 0-16.0mm with 4.0mm magnetic ball (FH10-M only!) 0-24.0mm with 6.0mm magnetic ball (FH10-M only!) |
| Accuracy with FH4 Probes | 0-1.3mm (1mm ball): ±(3 µm + 1% of reading) 0-2.0mm: ±(3 µm + 1% of reading) 0-3.5mm: ±(5 µm + 1% of reading) 0-6.0mm: ±(10 µm + 1% of reading) 0-5.0mm (magnetic): ±(20 µm + 2% of reading) 0-9.0mm (magnetic): ±(40 µm + 2% of reading) |
| Accuracy with FH10 Probes | 0-4.0mm: ±(5 µm + 1% of reading) 0-7.0mm: ±(10 µm + 1% of reading) 0-10.0mm: ±(20 µm + 1% of reading) 0-13.0mm: ±(20 µm + 1% of reading) 0-16.0mm (magnetic): ±(40 µm + 2% of reading) 0-24.0mm (magnetic: ±(60 µm + 2% of reading) |
| Low Range Resolution | FH4: 0.1 µm FH10: 0.2 µm |
| Repeatability | Better than ± (1 µm + 0.5 % of reading) |
| Measuring Principle | Magnetostatic |
| Logging Rate | 1, 2, 5, 10, 20 readings per second (selectable) |
| Data Memory | FH7200: 100,000 values FH7400: 240,000 values |
| Calibration Modes | Factory, Zero, Zero + up to 4 points |
| Measuring Units | Metric: µm, mm Imperial mils, inch |
| Statistical Charting | Numeric, trend, and histogram (with MiniTest 7400 FH only) |
| Interfaces | RS232 TTL + IrDA 1.0 |
| Models | MiniTest 7200 FH MiniTest 7400 FH |
| Operating temperature | –10 °C to +60°C (Storage temperature: –20°C to +80°C) |
| Dimensions | 153 mm x 89 mm x 32 mm |
| Weight | 310 grams |
| Power supply | 4 x AA batteries, or optional AC adapter |
