We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email: info@checkline-europe.co.uk
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

TA134 IVO Tachometer with 2 Limits and Multifunction


High quality tachometers by IVO, available in many configurations shown below. The TA134 is equipped with a mounting plate to install the tachometer in many applications.

Features
  • Batch counter with scaling factor to be programmed from 0.0001...9999.99
  • Interface RS485
  • With two limits and scaling

Dimensions
Dimensions TA134


Product Configurations

Pin assignment


Block Diagram

Downloads

Specifications
Mechanical data
Display: 7-segment LCD-display with 2 rows of digits and background illumination
6-digit tacho display, 7 mm high
6-digit display of limit values, 4 mm high
Decimal point can be programmed
Suppression of leading zero
Measuring units can be programmed “1/h”, “1/min”, “1/s”
Operation, keypad: Front membr. with short-stroke keys
Front dimensions: DIN housing 48 x 48 mm
Mounting: Front-plate installation
Fastening: By means of clamping frame
Weight: Version AC: approx. 260 g
Version DC: approx. 140 g
Type of connection: Plug-in screw terminals
Grid 5.08 mm / 3.81 mm
Core cross-section: Max. 1.5 mm2
Housing material: Polycarbonate black, UL 94V-0
Front membrane: Polyester


Ambient conditions
Ambient temperature: 0...+50 °C
Storage temperature: -20...+70 °C
Relative humidity: Max. relative humidity 80 %, at 25 °C, non condensing
Protection: Front IP 65 to DIN 40050
General rating: EN 61010 Part 1
- Protection class II
- Overvoltage protection categ. II
- Contamination factor 2
Interference immunity: EN 50082-2
Emitted interference: EN 50081-1


Electrical data
Supply voltage: Choice of two voltages (AC) via switch on device.
Always set to higher voltage when supplied.
115 / 230 VAC ±10 % (50 / 60 Hz)
24 / 48 VAC ±10 % (50 / 60 Hz)
12...30 VDC 5 % RW ±10 %
Power consumption: 5 VA, 4 W
Sensor supply: 10...26 VDC / 60 mA
Signal inputs: Comparator inputs PNP, NPN or AC logic, NAMUR
Voltage level 4 V...40 V
Input resistance 3 kOhm
Tachometer rate: 25 Hz, 40 kHz
Counting rate: 3 Hz, 25 Hz, 10 kHz (batch counter)
Control inputs: 3 control inputs to be programmed as Reset, Stop, Hold, Print, Keylock etc.
Relay signal outputs: 2 floating relays to be programmed as normally closed or open
Internal spark suppression
Max. switch. voltage 250 VAC /110 VDC
Max. switch. current 1 A
Max. switch. capacity 150 VA / 30 W
Electronic outputs: Optocoupler
Max. switching voltage 50 V
Max. switching current 25 mA
Data back-up: > 10 years via EEPROM
If the desired model is not shown in the list of prices, price is on request

Request Information / Quotation




Your information/quotation request is send!


Close



Your message was successfully sent!

Due to technical problems, we are temporarily unavailable by phone. For requests, our head office can be reached under number: +31 53 4356060