We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact Us
Email: info@checkline-europe.co.uk
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

For support please call
+44 (0)121 2855 222

ZX-3 Wall Thickness Gauge

Made in the USAThe Dakota ZX-3 Wall Thickness Gauge is the perfect choice for assessing wall thickness, testing corrosion of all metals all metals, ceramics, glass and most hard plastics.

Depending on material and type of probe, the ZX-3  measures material and  thickness up to 915 mm. it offers further to select from 8 preset materials as well as program 2 custom material velocities. In addition you can adjust the velocity as needed and calibrate to a sample of known thickness (velocity is automatically calculated).

Additionally, to optimize linearity over a wide range, the user can perform a 2 point calibration to two samples of known thickness. The optimal velocity is then automatically calculated to provide the highest accuracy and linearity between the low and high calibration points.

This gauge also has a single thickness reading mode and a scan mode. In scan mode you "brush"the probe of a large area and the minimum thickness assessed will be indicated.

The Dakota ZX-3 is impact-resistant and environmentally sealed (IP65) and its probe is waterproof.

  • Measuring range:
    1.00 - 199.9 mm (with standard probe) - 0.63 - 914,4 mm (depending on probe and material)
  • Resolution of 0.01 mm
  • Measuring unit switchable between mm and inch
  • High visibility LCD Display is readable in all lighting conditions and temps as low -30 °C
  • Selectable Backlight ON/OFF/AUTO
  • Impact-resistant and environmentally sealed (IP 65) extruded aluminum housing
  • The probe is waterproof and can be submerged in water
  • Includes NIST Traceable Calibration Certificate
  • 5 Year Warranty

Measuring Limits
Minimum Radius for Convex Surfaces Minimum Radius for Convex Surfaces 8.89 mm
Minimum Radius for Concave Surfaces 76.2 mm
Minimum Radius for Concave Surfaces Minimum Headroom 25.0 mm
Minimum Sample Diameter Minimum Sample Diameter 3.8 mm
Minimum Substrate Thickness - F Minimum Substrate Thickness - F na
Minimum Substrate Thickness - NFe na

Additional functions:

Automatic or manual zeroing of the test head

Probe diameter:
Specify the probe diameter for increased linearity.

High-speed surface scan:
Shows the lowest value detected during a 100 Hz scan.

Differential mode:
Displays ± deviation from an entered nominal value.

Alarm Mode:
Adjustable maximum and minimum limits. Limit indicated by a visual and an audible alarm.

Complete Kit
The ZX-3 is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.


A-302-6002 A-302-6002 protective cover for TI series

More details

A-302-6002 A-302-6002 protective cover for TI series 127313

Category Wall Thickness Probes

More details

Category  Wall Thickness Probes 810

TI-25-UW-50 50 Foot (15 m) Underwater Probe / Cable Assembly

  • 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors.
  • 1/2", 5 MHz Probe for wide variety of steel, stainless steel, aluminum and similar applications.

More details

TI-25-UW-50 50 Foot (15 m) Underwater Probe / Cable Assembly 126123

Total Measuring Range: 0.025 - 36.000 inches 0.63 - 914.4 mm (depends on material and transducer/probe type)
Measuring Range (Steel): 0.040-8.000 inches 1.00-199.9 mm (with standard transducer T-102-2000)
Resolution: 0.001 inch (0.01 mm)
Measuring Mode: Pulse-Echo (P-E)
Velocity Range: 0.0120 to .7300 in/μs. 305 to 18,542 meters/sec
Probe (Standard) 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2000
Cable 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors
Probes (optional) 1 to 10 MHz, 3/16" up to 1 inch (custom probes available)
LCD Display Multi-function 7 segment 4.5 digit liquid crystal display with 0.500" digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes
Display Update Rate 10 Hz (10 updates/sec)
Temp. Limits Ambient: -30 to 75° C (-22 to 167° F) Material: -20 to 100° C (0 to 200° F) High temperature probes available
Battery Type 2x AA batteries (rechargeable batteries can be used)
Battery Life 45 hours continuous use
Housing Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed)
Classification: IP65
Weight: 308 grams (11 ounces)
Pulse Repetition Frequency (PRF): 200 Hz (200 pulses/sec)
Dimensions 63.5 x 131.3 x 31.5 mm (2.5" x 5.17" x 1.25")
Certifications NIST Traceable and MIL-STD-45662A
Warranty: Gauge: 5 Years Probes: 90 Days

Buy Now

Product name
ZX-3 Ultrasonic Wall Thickness Gauge Complete Kit with T-102-2000 Probe
£ 1.166,00 

Product name
A-302-6002 - Protective Rubber Boot For TI-Series Small
£ 74,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability : Available , preorder 1-2 weeks , special order, request

Request Information / Quotation

Your information/quotation request is send!


Your message was successfully sent!