We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email: info@checkline-europe.co.uk
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

PZX-7 Precision Ultrasonic Wall Thickness Gauge


The PZX-7 is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics.

The measuring range in steel is from 0.15 to 25.40 mm. When using a single element delay tip transducer, the gauges can measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E) when measuring thicker materials.  For wall thickness measurements up 923 mm , a single ement contact transducer can be used. 

The mode Plastic Mode (PLAS) combined with the us of the optional Graphite Delay Line Tip probe is to deployed at the measurement of plastic materials .

 The PZX-7 does not have any built-in memory, but can transfer single values (value on the display) via the USB port to a PC or compatible data collector withot any software being required.

The PZX-7 Precision Ultrasonic Wall Thickness Gauge is packaged in a sturdy extruded aluminum housing which is sealed for excellent protection.


Features
  • Measuring range on steel:
    0.15-25.40 mm with standard delay line transducer
  • Resolution of 0.001 mm
  • Measuring unit switchable between mm and inch
  • High visibility LCD Display is readable in all lighting conditions and temps as low -30 °C
  • Selectable Backlight ON/OFF/AUTO
  • Impact-resistant and environmentally sealed (IP 65) extruded aluminum housing
  • 5 Year Warranty

Delay Line Tips for PZX-7


Complete Kit

The PZX-7 is supplied as a complete kit including:

  • PZX-7 gauge
  • the standard probe
  • 125 ml bottle of coupling fluid
  • USB-C Data transfer cable
  • 2 AA batteries
  • NIST Traceable Calibration Certificate
  • Manual 


Related Products

TI-PVX Precision Ultrasonic A-scan Wall Thickness Gauge


  • Multiple calibration options: One Point, Two Point, or selection from a Material List.
  • 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications.
  • Hardware AGC gain control for multiple echo and thru-paint measurement.

More details

TI-PVX Precision Ultrasonic A-scan Wall Thickness Gauge

A-302-6002 A-302-6002 protective cover for TI series



More details

A-302-6002 A-302-6002 protective cover for TI series

Category Accessories


More details

Category  Accessories Accessories

Specifications
Measurement range with standard probe: 0.15-25.40 mm with standard delay line transducer in steel
Probe (standard): 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507)
Velocity Range: 305 to 18,542 m/sec
Resolution: 0.001 mm. 0.01 mm user-selected units and resolution
Display: Multi-function 7 segment 4.5 digit liquid crystal display with Back-light
Pulse Repetition Frequency (PRF): 200 pulses/sec
Plage de mesure avec sonde standard: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS)
Cable length: 1.2 m
Display refresh rate: 10 updates/sec
Battery Type: 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used)
Battery Life: 35 hours on alkaline and 18 hours on NiCad
Housing: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed)
Housing Protection: IP65
Weight: 308 grams
Dimensions: 64 x 131 x 32 mm
Certificates: NIST Traceable
Guarantee: Gauge: 5
Probes: 90 Days

Request Information / Quotation




Your information/quotation request is send!


Close



Your message was successfully sent!