We Checkline Europe Ltd would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email: info@checkline-europe.co.uk
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

MikroTest Magnetic Coating Thickness Gauge


Made in GermanyThe MikroTest has been the most widely used coating thickness gauge in the world over the last 40 years. The MikroTest complies with the highest technical standards of all analogue magnetic coating thickness gauges. This magnetic coating thickness gauge works on the magnetic attraction principle to measure all non-magnetic coatings on steel and galvanic nickel on steel.

The measurement of the coating thickness is based on magnetic attraction. The attractive force is related to the distance between a permanent magnet and a steel substrate. This distance represents the thickness of the coating under measure. The magnet is lifted from the surface by means of a spring connected to the magnet arm. The force needed to lift the magnet is directly related to the angle of rotation of the torsion spring. This measuring principle is also especially suited for electroplated nickel on copper, aluminium and other non-ferrous metals. This measurement principle ensures fully automatic measurement where no power supply or calibration is required.

The MikroTest is supplied in 11 different models to be suitable for every requested application. The balanced measuring system ensures accurate readings at any angle: horizontal, vertical and overhead. Also, the gauge allows measurements on curved surfaces. Also, it is able to provide you with precise measurements in tubes and on round parts due to the automatic operation.


Features
  • Precision measuring system resistant to solvents
  • Highest accuracy with simplest operation
  • Simple set-up and measurement
  • Robust case to protect from mechanical shocks
  • One point measurement
  • All gauges operate without power or battery
  • No calibration required

Model selector:
Model:Range:Tolerance*:Application:Min. surfaceMin. curvature radius of the sampleMin. base thickness 
5/6 G 0-100 μm± 1 μm or 5% of readingElectroplating and paint coatings on steel**Ø 20 mm5 mm convex/ 25 mm concave 0.5 mm 
5/6 F 0-1000 μm± 5 μm or 5% of readingPaint on steel**Ø 30 mm8 mm convex/ 25 mm concave0.5 mm 
6 S3 0.2-3 mm± 5% of readingEnamel, plastic, rubber on steel**Ø 30 mm15 mm convex/ 25 mm concave1.0 mm 
6 S5 0.5-5 mm± 5% of readingEnamel, plastic, rubber on steel**Ø 50 mm 15 mm convex/ 25 mm concave1.0 mm 
6 S10 2.5-10 mm± 5% of readingEnamel, plastic, rubber on steel**Ø 50 mm 15 mm convex/ 25 mm concave2.0 mm 
6 S20 7.5-20 mm ± 5% of readingEnamel, plastic, rubber on steel**Ø 100 mm100 mm convex/150 mm concave 7.0 mm 
Ni 50 6 0-50 μm± (1 μm + 5% of reading) Electroplated nickel on non-ferrous substratesØ 15 mm5 mm convex/ 25 mm concave-- 
Ni 100 6 0-100 μm± (1 μm + 5% of reading) Electroplated nickel on non-ferrous substratesØ 15 mm5 mm convex/ 25 mm concav-- 
NiFe50 6 0-50 μm± (2 μm + 8% of reading)Electroplated nickel on steel**Ø 20 mm10 mm convex/ 25 mm concave0.5 mm 
* Referring to the manufacturer's standards ** Steel: ST 33 to ST 60

Specifications
Range 6 S3: 0.2 mm - 3 mm 6 S5: 0.5 mm - 5 mm
6 S10: 2.5 mm - 10 mm
6 NiFe50: 0 µm - 50 µm
Application 6 S3; 6 S5; 6 S10: enamel, plastic, rubber on steel
6 NiFe50: electroplated nickel on steel
Tolerance 6 S3: ± 5 % - of reading
6 S5: ± 5 % - of reading
6 S10: ± 5 % - of reading
6 NiFe50: ± 2 µm
6 NiFe50: + 8 % - of reading
Minimum Surface 6 S3: Ø 30 mm
6 S5: Ø 50 mm
6 S10: Ø 50 mm
6 NiFe50: Ø 20 mm
Minimum Curvature Radius 6 S3: 15 mm - convex
6 S3: 25 mm - concave
6 S5: 15 mm - convex
6 S5: 25 mm - concave
6 S10: 15 mm - convex
6 S10: 25 mm - concave
6 NiFe50: 10 mm - convex
6 NiFe50: 25 mm - concave
Minimum Base Thickness 6 S3: 1.0 mm
6 S5: 1.0 mm
6 S10: 2.0 mm
6 NiFe50: 0.5 mm
Ambient Temperature -20 °C - 100 °C
Conforming Standards DIN EN ISO 2178, DIN 50 982, ASTM B 499, E 376, D 1186, G 12, B 530, BS 5411, ISO 2361
Dimensions Gauge: 215 mm x 55 mm x 29 mm
Plastic carrying case: 235 mm x 185 mm x 46 mm
Weight Case incl. gauge approx. 560 g

Downloads

Complete Kit
The MikroTest is supplied with the following items:
- MikroTest gauge
- Hand strap
- Plastic carrying case
- Operating instructions


Buy Now
Products

Product name
Price
Quantity
MikroTest G 5 - Manual Magnetic Coating Thickness Gauge 0 - 100 μm
£ 437,00 
MikroTest F 5 - Manual Magnetic Coating Thickness Gauge 0 - 1000 μm
£ 437,00 
MikroTest G 6 - Automatic Magnetic Coating Thickness Gauge 0 - 100 μm
£ 473,00 
MikroTest F 6 - Automatic Magnetic Coating Thickness Gauge 0 - 1000 μm
£ 473,00 
MikroTest S3 6 - Automatic Magnetic Coating Thickness Gauge 0,2 - 3 mm
£ 621,00 
MikroTest S5 6 - Automatic Magnetic Coating Thickness Gauge 0,5 - 5 mm
£ 621,00 
MikroTest S10 6 - Automatic Magnetic Coating Thickness Gauge 2,5 - 10 mm
£ 621,00 
MikroTest S20 6 - Automatic Magnetic Coating Thickness Gauge 7,5 - 20 mm
£ 1.306,00 
MikroTest Ni 50 6 Automatic Coating Thickness gauge 0 - 50 μm
£ 903,00 
MikroTest Ni 100 6 Automatic Coating Thickness gauge 0 - 100 μm
£ 903,00 
MikroTest NiFe 50 6 Automatic Coating Thickness gauge 0 - 50 μm
£ 1.306,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability : Available , preorder 1-2 weeks , special order, request

Video


Request Information / Quotation




Your information/quotation request is send!


Close



Your message was successfully sent!