Tension meter for measuring all kinds of tapes and bands, such as textile ribbons, films, foils, fiber bunches, etc.
When selecting the instrument for your specific application, please keep in mind that:
1. Rollers of different widths are not interchangeable by the user.
2. The roller width should correspond with the width of the material to be measured. Otherwise incorrect measuring results may occur and the instrument may be damaged.
SCHMIDT has the solution to any tension measuring problem! Please contact us to discuss your application requirements.
To assist you in selecting the right tension meter for your specific application, please furnish:
|Model||Ranges||Measuring Head Width** mm||Roller Widths mm|
|Other tension ranges, measuring head widths and material path calibrations available on request. Other units of measure available, such as g or kg.|
* SCHMIDT calibration material textile ribbon or film, depending on tension range and roller width
** Outer distance between outside guide rollers
Special calibration using customer supplied samples is recommended, if process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape. For this purpose a material sample of about 5 m should be supplied.
|Calibration:||According to SCHMIDT factory procedure|
|Accuracy:||±1% full scale or ±1 graduation on scale|
|Scale diameter:||41 mm|
|Air humidity:||85% RH, max.|
|Housing material:||Die-cast aluminium|
|Housing dimensions:||188 x 85 x 45 mm (L x W x H)|
|Weight, net (gross):||approx. 520 g (1300 g)|