AT50TKIT Tile Conversion Kit

The AT50TKIT 50 mm x 50 mm Tile Kit is designed to measure tensile strength of ceramic tile cementitious, dispersion and reaction resin adhesives in accordance with BS EN 12004-2.

Interchangeable stand-off allows a PosiTest ATM or ATA to pull 50 mm x 50 mm square dollies conforming to BS EN 12004-2.
Ideal for cementitious adhesive for tiles

Steps to Perform a Pull-Off Test

1. Ceramic Tile Installation
   Apply ceramic tiles to the concrete test substrate according to BS EN 12004-2 
2. ​Glue & Dolly Application
   a) Ensure the 50 mm x 50 mm steel dolly plate and ceramic tile surface is clean.
   b) Attach the dolly plate to the ceramic tile using epoxy adhesive. Allow the adhesive to cure per the manufacturer’s instructions.
   c) Screw the dolly post fully onto the dolly plate
3. Pull-off Test
   a) Ensure the 50 mm x 50 mm tile kit stand-off is attached to the instrument.
   b) Conduct pull-off test in accordance with PosiTest AT instruction manual.